Questions

Adders are generally of five types:

1.Ripple Carry Adder:

The Ripple carry adder(RCA) consists of a building block named Half Adder(HA) which is cascaded to form a Full Adder(FA). These buildingblocks HAs and FAs are also the building blocks of all types of adders.The n full adders are cascaded to form n bit RCA.

The full adder has three input pins(input Ai,input Bi,carryin Ci) and two output pins(Sum and Ci+1).Its equations are:

Sum=Ai^Bi^Ci

Ci+1=Ai.Bi+Bi.Ci+Ai.Ci

2. Carry Lookahead Adder:

The Carry Lookahead Adder(CLA) reduces the delay as that in RCA. Let Gi=Ai.Bi, and Pi=Ai^Bi, then Ci+1=Gi+Pi.Ci.

The expressions for Sum and Ci+1 is then defined completely in terms of input pins rather wait for input carry to appear.

3. Carry Select Adder:

The carry select adder uses duplicate modules for each combination of input carry(i.e. 1 and 0).The multiplexers then select the appropriate sum and carry output according to the carry output of the preceding stages.

4. Carry Skip Adder:

The carry skip adder are as fast as carry lookahead adders which are the fastest adders but its spped decreases to about 20-30% if input operands are 64-bit or more. In these adders we divide the input bit stream into various blocks and make use of two observations:

-if each element of the two bit streams are unequal,i.e. Ai!=Bi than the carry input of the block is equal to the carry input.

-if each element of the two bit streams are equal,i.e. Ai=Bi than the carry input of the block is opposite of the carry input.

5. Carry Save Adder:

The carry save adder reduces the addition of three elements into addition of two elements,i.e. if you want sum of nine numbers it reduces it into sum of six numbers. In first step the sum of three numbers is calculated without bothering for the carry.During the second step only carry is calculated which is then added to the generated sum to give the required sum. 

"Pressure" is the ratio of mass to area. So, for any given area, the one with more mass pressing on it will experience a higher pressure.

As you go more deeply into the atmosphere OR earth itself, you are putting more and more mass over you. For the same unit area therefore, the pressure, (mass/area) increases.

Hence, the lowest layer will always have the highest pressure i.e, inner core.

A bureaucracy is a way of administratively organizing large numbers of people who need to work together.

The term bureaucracy literally means "rule by desks or offices".

Organizations in the public and private sector, including universities and governments, rely on bureaucracies to function.

ICICI Bank topped the list of banks that witnessed the most number of frauds during April-December period of 2016 with state-owned SBI taking the second spot, RBI data said.