Sawaal
  • Home/
  • Certification Questions

Certification Questions

What are certifications?

Certification is the recognition of an individual to be qualified for a job or task. These Certification programs setup IT standards and play major role in developing a qualified workforce. Certifications can raise the technical standards.

Why certifications?

One can measure his/her abilities in their respective professional knowledge and present themselves through certificates. The certification programs assure technical proficiency of IT professionals by measuring their technical skills and knowledge in a specific IT support function or technology.

Who can do certifications?

Definitely who aim for professional growth in their respective functionality or technology can plan for Certifications. This can also tell how valuable certifications are to be potential employers. Any qualified and well experienced IT professional can step-up to take the certification.

How to do certifications?

When you decided to take the certification, well done! You have stepped up the professional ladder to upgrade your skills and knowledge. You can easily plan, work hard and grab a certification. Find some help from following steps.

  • Decide your certification – explore your skills and find a certification that matches your skill set.
  • Research the certification-evaluate the process of certification. Find details of validity, qualification for certification.
  • Evaluate your experience - asses your real experience with the material you gathered for certification and come up with a plan which areas to concentrate more.
  • Apply for certification – Get registered for your Exam.
  • Plan of study – you can study your well experienced areas yourself and can take trainings if required to boost your preparation. You can practice more through mock tests you find online, can keep discussing in forums and blogs.
  • Grab Certificate – finally, you can grab a certification with your positive attitude, hard work.
Popular Latest Rated
Q:

You need to create an access list that will prevent hosts in the network range of 192.168.160.0 to 192.168.191.0 . Which of the following lists will you use?

A) access - list 10 deny 192.168.160.0 255.255.224.0 B) access - list 10 deny 192.168.160.0 0.0.191.255
C) access - list 10 deny 192.168.160.0 0.0.31.255 D) access - list 10 deny 192.168.0.0 0.0.31.255
 
Answer & Explanation Answer: C) access - list 10 deny 192.168.160.0 0.0.31.255

Explanation:

The range of 192.168.160.0 to 192.168.191.0 is a block size of 32. The network address is 192.168.160.0 and the mask would be 255.255.224.0, which for an access list must be a wildcard format of 0.0.31.255 . The 31 is used for a block size of 32. The wildcard is always one less than the block size.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

1 4315
Q:

The organizational form in which the project manager has informal authority over team members and little or no input to team member’s performance appraisal is called

A) weak matrix. B) functional.
C) strong matrix. D) composite.
 
Answer & Explanation Answer: A) weak matrix.

Explanation:

“Weak matrices maintain many of the characteristics of a functional organization, and the project manager role is more that of a coordinator or expediter than that of a true project manager.”

Report Error

View Answer Report Error Discuss

Filed Under: PMP Certification

2 4311
Q:

If you do not want to dun a vendor beyond a particular level

A. use dunning block on the vendor master

B. use dunning block on the dunning procedure

C. use dunning clerk to block dunning

D. use dunning key to limit the maximum level

Answer

Answer : D

Report Error

View answer Workspace Report Error Discuss

Subject: SAP FI

0 4309
Q:

The exhibit below shows the output of a show ip interface brief on a Cisco router.

r1#show ip interface brief

Serial0/0 does not respond to ping requests. What step would you take to resolve the problem?

A) Change ip address on Serial0/0 B) Enable the interface Serial0/0
C) Check the physical connection in Serial 0/0 D) The interface looks fine in status up, problem must be somewhere else
 
Answer & Explanation Answer: C) Check the physical connection in Serial 0/0

Explanation:

In order for an interface to work properly and respond to ping requests, both Status and Protocol must be up.

Report Error

View Answer Report Error Discuss

Filed Under: CCENT

1 4306
Q:

Which of the following is true when describing a multicast address?

A) Packets addressed to a multicast address are delivered to a single interface B) packets are delivered to all interfaces identified with the address. This is also called a one-to-many address
C) A multicast address identifies multiple interfaces and is delivered to only one address. This address can also be called one-to-one-of-many D) These addresses are meant for nonrouting purposes,but they are almost globally unique, so it is unlikely they will have an address overlap
 
Answer & Explanation Answer: B) packets are delivered to all interfaces identified with the address. This is also called a one-to-many address

Explanation:

Packets addressed to a multicast address are delivered to all interfaces identified with the multicast address, the same as in IPv4. It is also called a one-to-many address. You can always tell a multicast address in IPv6 because multicast addresses always start with FF.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

0 4304
Q:

The currency of the controlling area must always be the same as the currency of the company code.

A) TRUE B) FALSE
Answer & Explanation Answer: B) FALSE

Explanation:

In cross-company assignments, every company code can be processed in its own currency. You are free to select the controlling area currency.

Report Error

View Answer Workspace Report Error Discuss

Subject: SAP CO

1 4295
Q:

What are some recommendations for increasing Quality Score for a keyword?

Answer

Edit the ad associated with that keyword and direct users to a landing page that is very relevant.

Report Error

View answer Workspace Report Error Discuss

Subject: Google Certification

13 4291
Q:

Which of the following best describes how the user is alerted with information system and configuration alerts?

A) A popup occurs and the Windows 7 desktop contrast is dimmed. Until you acknowledge the alert the screen will not move. B) If Aero is installed the shaking alert flag appears in the index bar of every open window.
C) A flag in the taskbar with a red D) All of the above
 
Answer & Explanation Answer: C) A flag in the taskbar with a red

Explanation:
Report Error

View Answer Report Error Discuss

Filed Under: MCSA-Microsoft Certified Solutions Associate

4 4286