GATE Questions

---

Given U=120

5% of 120 = 6

Therefore, Students who can play Chess alone or Carroms alone =  120 - (30+40+6)= 44

Number of liters of water in 150 liters of the mixture = 20% of 150 = 20/100 x 150 = 30 liters.
P liters of water added to the mixture to make water 25% of the new mixture.
Total amount of water becomes (30 + P) and total volume of mixture is (150 + P).
(30 + P) = 25/100 x (150 + P)
120 + 4P = 150 + P => P = 10 liters.

Since 653xy is divisible by 5 as well as 2, so y = 0.
Now, 653x0 must be divisible by 8.
So, 3x0 must be divisible by 8. This happens when x = 2
x + y = (2 + 0) = 2.

Let money invested by Raghu = Rs. x
Money invested by Trishul = 9/10 x = 0.9x
Money invested by Vishal = 9/10x * 110/100 = 0.99x
Also, x+0.9x+0.99x = 5780
= x= 5780/2.89 = 2000

Therefore, amount invested by Raghu is Rs. 2000.

Ratio of Milk and water in a vessel A is 4 : 1

Ratio of Milk and water in a vessel B is 3 : 2

Ratio of only milk in vessel A = 4 : 5

Ratio of only milk in vessel B = 3 : 5

Let 'x' be the quantity of milk in vessel C

Now as equal quantities are taken out from both vessels A & B

=> 4/5     :     3/5
               x 
  3/5-x          x - 4/5

=> 35-xx-45 = 11 (equal quantities)

=> x = 7/10

Therefore, quantity of milk in vessel C  = 7

=> Water quantity = 10 - 7 = 3

Hence the ratio of milk & water in vessel 3 is 7 : 3 

Let us assume that the lotion has 50% alcohol and 50% water.
ratio = 1:1
As the total solution is 9ml
alcohol = water = 4.5ml
Now if we want the quantity of alcohol = 30%
The quantity of water = 70%
The new ratio = 3:7
Let x ml of water be added
We get,
4.54.5+x = 37
=> x=6
Hence 6ml of water is added.

Let the speeds of the car, train and bus be 5x, 9x and 4x km/hr respectively.
Average speed = 5x + 9x + 4x/3 = 18x /3 = 6x km/hr.
Also, 6x = 72 => x = 12 km/hr
Therefore, the average speed of the car and train together is = 5x+9x2= 7x = 7 x 12 = 84 km/hr.

When the switch is ON, in a tube light choke is nothing but the coil/ballast ( inductor) which is used to induce the high voltage across it. as we know that inductor has property to induce high voltage for the brief period of time, this high voltage is required to ionize the gases in the starter.

Then gas inside the starter gets ionized due to this full voltage and heats the bimetallic strip that is caused to be bent to connect to the fixed contact. Current starts flowing through the starter. Although the ionization potential of the neon is the little bit more than that of the argon but still due to small electrode gap high voltage gradient is appeared in the neon bulb and hence glow discharge is started first in a starter.

As voltage gets reduced due to the current causes a voltage drop across the inductor, the strip cools and breaks away from the fixed contact. At that moment a large L di/dt voltage surge comes across the inductor at the time of breaking.

This high valued surge comes across the tube light electrodes and strikes penning mixture (mixture argon gas and mercury vapor).

Gas discharge process continues and current gets the path to flow through the tube light gas only due to low resistance as compared to the resistance of starter.