CISCO Certification Questions

Q:

Convert the following from binary format to hexadecimal

11001010.11110101.10000011.11101011

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

0 2037
Q:

When is redistribution required for EIGRP?

Answer

Redistribution is required when more than one EIGRP session or process is running and they are identified with different ASNs. Redistribution shares topology information between EIGRP sessions.

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

0 2023
Q:

Describe the functions of DNS and DHCP in the network?

Answer

Dynamic Host Configuration protocol (DHCP) provides network configuration information (including IP address) to hosts, eliminating the need to perform the configurations manually.


Domain Name Service  (DNS)resolves hostnames - both internet names such as www.routersim.com and device names such as workstation 2 to IP addresses, eliminating the need to know the IP address of a device for connection purposes.

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

0 2022
Q:

What type of Cisco tagging information allows VLANs to be multiplexed over a trunk link through an external encapsulation method?

Answer

Inter-Switch Link (ISL)

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

1 2015
Q:

Differentiate types of Ethernet cabling and identify their proper application?

Answer

The three types of cables that can be created from an Ethernet cable are straight-through (to connect a PC's or a router's Ethernet interface to a hub or switch), crossover (to connect hub to hub , hub to switch, switch to switch, or PC to PC), and rolled (for a console conection from a PC to a router or switch).

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

1 2008
Q:

Assume a router has a loopback address of 135.77.9.254. Convert the loopback address to an IS-IS system ID.

Answer

The loopback address written in dotted decimal and using three digits for each byte has a value of 135.077.009.254. The system ID is 13.50.77.00.92.54.

Report Error

View answer Workspace Report Error Discuss

Subject: CCNP

1 2007
Q:

Which proprietary Cisco STP extensions would put a switch port into err-disabled if a BPDU is received on this port?

Answer

BPDUGuard

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

0 1978
Q:

In thefollowing output, what type of NAT is being used?

ip nat pool todd-nat 170.168.10,10 170.168.10.20 netmask 255.255.255.0

Answer

Dynamic NAT

Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

0 1975