Technical Questions

interrupt is a signal send by external device to the processor so as to request the processor to perform a particular work.

A signal informing a program that an events has occurred. when a program receives an interrupt signal, it takes a specified action (which can be to ignore the signal).

MAC - Media Access Control, address is a globally unique identifier assigned to network devices, and therefore it is often referred to as hardware or physical address.

MAC addresses are 6-byte (48-bits) in length, and are written in MM:MM:MM:SS:SS:SS format.

In spite of defining the function f() as returning void, the program is trying to collect the value returned by f() in the variable a.

There are 12 interrupts in 8085.

3MHz is the maximum clock frequency for 8085.

 #include<stdio.h>
int main(){
  int r,i,j,k;
  printf("Enter the number range: ");
  scanf("%d",&r);
  for(i=1;i<=r;i++){
      for(j=1;j<=10;j++)
           printf("%d*%d=%d ",i,j,i*j);
      printf("\n");
  }
  return 0;
}

Sample Output:
Enter the number range: 5

1*1=1 1*2=2 1*3=3 1*4=4 1*5=5 1*6=6 1*7=7 1*8=8 1*9=9 1*10=10
2*1=2 2*2=4 2*3=6 2*4=8 2*5=10 2*6=12 2*7=14 2*8=16 2*9=18 2*10=20
3*1=3 3*2=6 3*3=9 3*4=12 3*5=15 3*6=18 3*7=21 3*8=24 3*9=27 3*10=30
4*1=4 4*2=8 4*3=12 4*4=16 4*5=20 4*6=24 4*7=28 4*8=32 4*9=36 4*10=40
5*1=5 5*2=10 5*3=15 5*4=20 5*5=25 5*6=30 5*7=35 5*8=40 5*9=45 5*10=50

0  0  1

That's what some of the compilers would give. But some other compiler may give a different answer. The reason is, when a single expression causes the same object to be modified and then inspected the behaviour is undefined.

Latch is a D-type flip-flop used as a temporary tsorage device controlled by a tiing singnal, which can store 0 or 1. the primary function of a Latch is data storage. It is used in output devices such as LED, to hold the data for display.

To Store Monitor programs.