An accounts receivable aging is a report that lists unpaid customer invoices and unused credit memos by date ranges. A typical aging report lists invoices in 30-day "buckets," where the left-most column contains all invoices that are 30 days old or less, the next column contains invoices that are 31-60 days old, the next column contains invoices that are 61-90 days old, and the final column contains all older invoices. The report is sorted by customer name, with all invoices for each customer itemized directly below the customer name, usually sorted by either invoice number or invoice date. A sample report follows, though without the individual invoice detail that is usually found in such a report:

Customer Name 

Total A/R 0-30

Days 31-60

Days 61-90

Days 90+

Days

Abercrombie $15,000 $10,000 $5,000 

Bufford Inc. 29,000 20,000 9,000 

Chesterton Co. 83,000 47,000 21,000 12,000 3,000

Denver Brothers 8,000 8,000

Totals $135,000 $57,000 $46,000 $21,000 $11,000

If the report is generated by an accounting software system (which is usually the case), then you can usually reconfigure the report for different date ranges. For example, if your payment terms are net 15 days, then the date range in the left-most column should only be for the first 15 days. This drops 16-day old invoices into the second column, which highlights that they are now overdue for payment.

The report primarily contains invoices, but it may also contain credit memos that have not been used by customers, or which have not yet been matched against an unpaid invoice.

The aging report is the primary tool used by collections personnel to determine which invoices are overdue for payment, and which therefore require them to contact customers. Given its use as a collection tool, the report may be configured to also contain contact information for each customer.

The aging report is also used as a tool for estimating potential bad debts, which are then used to revise the allowance for doubtful accounts. The usual method for doing so is to derive the historical percentage of invoice dollar amounts in each date range that usually become a bad debt, and apply these percentages to the column totals in the most recent aging report.

An additional use of the aging report is by the credit department, which can view the current payment status of any outstanding invoices to see if customer credit limits should be changed. This is not an ideal use of the report, since the credit department should also review invoices that have already been paid in the recent past. Nonetheless, the report does give a good indication of the near-term financial situation of customers.

A bad debt provision is a reserve that you build up over time against the future recognition of specific accounts receivable as being uncollectible. Thus, if a company has issued invoices for a total of $1 million to its customers in a given month, and has a historical experience of 5% bad debts on its billings, it would be justified in creating a bad debt provision for $50,000 (which is 5% of $1 million).

It is impossible to know the exact amount of bad debts that will occur at some point in the future from the current account receivable, so it is entirely normal to continually readjust the bad debt provision, as you gain a greater understanding of how collectible the accounts receivable really are. These adjustments may lead to future increases or decreases in the bad debt expense. Since these adjustments can be viewed as a means of manipulating a company's reported profits, you should fully document your reasons for making the adjustments.

You would create a bad debt provision with a debit to the bad debt expense account, and a credit to the bad debt provision account. The bad debt provision account is an accounts receivable contra account, which means that it contains a balance that is the reverse of the normal debit balance found in the associated accounts receivable account. Later, when a specific invoice is found to be uncollectible, you create a credit memo in the accounting software for the amount of the invoice that is uncollectible. The credit memo reduces the bad debt provision account with a debit, and reduces the accounts receivable account with a credit. Thus, the initial creation of the bad debt provision creates an expense, while the later reduction of the bad debt provision against the accounts receivable balance is merely a reduction in offsetting accounts on the balance sheet, with no further impact on the income statement.

The reason for a bad debt provision is that, under the matching principle, you should match revenues with related expenses in the same accounting period. Doing so shows the full effect of a billed sale transaction in a single accounting period. If you were to not use a bad debt provision, and instead used the direct write off method to only charge bad debts to expense when you were certain that a specific invoice was not collectible, then the charge to expense might be many months later than the initial revenue recognition associated with the billing. Thus, under the direct write off method, profits will be too high in the period of the billing to the customer, and too low in the later period when you finally charge some portion or all of an invoice to the bad debt expense.

A Customer Master Record is a permanent record that contains key information about a business partner or a material. This information must be entered into the system before any transactions can take place involving the business partner [customer] or a material. Entering all the information about a customer or a material into the system before making transactions insures that subsequent transactions or inquiries will have consistent data and reports and analyses can be done in an orderly way. Master Records can be edited or changed when necessary. Changing master records is frequently called "Maintaining" in SAP

BRS - Bank Reconciliation Statement

A bank reconciliation statement is a statement prepared by organizations to reconcile the balance of cash at bank in a company's own records with the bank statement on a particular date.

The differences may arise because of the following reasons:

     - Cheques deposited into bank but not yet collected by bank

     - Cheques issued by the organization but not yet presented for payment

     - Cheques directly deposited by customers into the bank

     - Bank charges debited by bank

     - Interest credited or some receipts directly collected by bank based on org. request.

     - Some payments directly made by bank based on the organizations request.

So, the statement shows the reasons as what are the reasons for difference in balance.

Trade receivables are amounts billed by a business to its customers when it delivers goods or services to them in the ordinary course of business. These billings are typically documented on formal invoices, which are summarized in an accounts receivable aging report. In the general ledger, trade receivables are recorded in a separate accounts receivable account, and are classified as current assets on the balance sheet if you expect to receive payment from customers within one year.

To record a trade receivable, the accounting software creates a debit to the accounts receivable account and a credit to the sales account when you complete an invoice. When the customer eventually pays the invoice, the accounting software records the cash receipt transaction with a debit to the cash account and a credit to the accounts receivable account.

Trade receivables vary from non trade receivables in that non trade receivables are for amounts owed to the company that fall outside of the normal course of business, such as employee advances or insurance reimbursements. Also, most or all of the transactions passing through the main accounts receivable account are generated by the accounting system, as you create customer invoices and credit memos, whereas the transactions recording non trade receivables nearly always involve journal entries.

After posting the all accounts in the Ledger a statement is prepared to showing debit and credit balances.Debit balances must be tally with the Credit side balance is called trial balance

Finance:It is the branch of economics that studies the management of money and other assets.In simpler terms it can be defined as the commercial activity of providing funds and capital.It addresses questions like -- what funds are required by the org & How they can be raised &  How they have to be allocated etc.

Accounts: It is the occupation of maintaining and auditing records and preparing financial reports for a business. Accounts provides quantitative information about finances. It addresses issues like what amount of funds have been allocated to various activities, how the book-keeping is being done etc.

Both functions are distinct but complimentary to each other.

Finance and accounts are highly specilized and distinct areas and hence most organizations have seperate sections of finance and accounts.

In international accounting LIFO and extraordinary items are prohibited

In international accounting, proposed dividend entry is made in the Year in which it is declared, but in Indian Accounting Standards Proposed Divided entry is passed in the year for which dividend is declared. e.g. Dividend for 09-10 declared in AGM on 14 Sept 2010, Financial (Accounting) Year = 2009-10

In Indian Accounting entry would be passed in 2009-10 Accounts books, but in International Accounting entry would be passed in the year 2010-11 Accounts books.