The minute hand angle is the easiest since an hour (i.e. 60 minutes) corresponds to the entire 360 degrees, each minute must correspond to 6 degrees. So just multiply the number of minutes in the time by 6 to get the number of degrees for the minute hand.
Here 15 minutes corresponds to 15 x 6 = 90 degrees

Next, you have to figure out the angle of the hour hand. Since there are 12 hours in the entire 360 degrees, each hour corresponds to 30 degrees. But unless the time is EXACTLY something o'clock, you have to write the time as a fractional number of hours rather than as hours and minutes.
Here the time is 9:15 which is (9 + 15/60) = 37/4 hours. Since each hour corresponds to 30 degrees, we multiply 30 to get (37/4)(30) = 277.5 degrees.

Since the hour hand is at 277.5 degrees and the minute hand is at 90 degrees, we can subtract to get the angle of separation. 277.5 - 90 = 187.5 =~ 360 - 187.5 = 172.5 degrees.

From statement A, we know that Pipe A can fill the tank in 40 hours. However, this information is not sufficient as we do not have the data for Pipe B. Hence, statement A alone cannot answer the given question.

From statement B, we know that Pipe B is one third as efficient as pipe A. However, we do not know the rate at which Pipe A fills the tank. Hence, we will not be able to find the rate at which Pipe B fills the cistern. Therefore, statement B alone is not sufficient to answer the question.

Now, if we combine the two statements, we know that Pipe A take 40 hours to fill the cistern.
Pipe B takes 120 hours to fill the cistern.

If they worked alternately, then either Pipe A could have started the cycle or Pipe B could have started the cycle.

If Pipe A started the sequence of filling alternately, then at the end of two hours, the two pipes together would have filled 1/40 + 1/120 = 1/30  th of the tank in an hour. Or the cistern will fill in 30 hours.

If Pipe B started the sequence, then at the end of 2 hours, the two pipes together would have filled 1/120 + 1/40 = 1/30 th of the tank in an hour. Or the cistern will fill in 30 hours.

As the answer obtained irrespective of which pipe started the sequence is the same, the correct answer is (3) - i.e., both the statement are sufficient to answer the question.

Here pairs interchanged are

2, 4 

3, 8

5, 6

Unchanged are 0, 1, 7, 9

Let the price of 1 litre of diesel be Rs.x and let Karthik initially buy 'y' litres of diesel.
Therefore, he would have spent Rs. xy on diesel.

When the price of diesel increases by 25%, the new price per litre of diesel is 1.25x.

Karthik intends to increase the amount he spends on diesel by 15%.
i.e., he is willing to spend xy + 15% of xy = 1.15xy

Let the new quantity of diesel that he can get be 'q'.
Then, 1.25x x q = 1.15xy
Or q = (1.15/1.25)y = 0.92y.

As the new quantity that he can buy is 0.92y, he gets 0.08y lesser than what he used to get earlier.

Or a reduction of 8%.

To cover a distance of 800 kms using a 800 cc engine, the amount of diesel required = 80 litres.

=> the amount of diesel required to cover a distance of 1000 kms = 1000 x 80/800 = 100 litres

However, the vehicle uses a 1200 cc engine and it is given that the amount of diesel required varies directly as the engine capacity.

i.e., for instance, if the capacity of engine doubles, the diesel requirement will double too.

Therefore, with a 1200 cc engine, quantity of diesel required = 1200/800 x 100 = 150 litres.

3000 – 3 = 2997

Here total distance = 154 + 101 = 255 mts
Given speed = 120 kmph = 120x5/18 m/sec
Hence, Time = d/s = 255x18/120x5 = 7.65 sec