Questions

Brightness of bulb depends on both voltage and current. The brightness depends on power.

Since we know that  Power (P) = Voltage x Current = V I

So whether you increase the current or the voltage the brightness will increase.

Example Illustration:

 If you connect a long bulb and a round bulb in series, the long bulb glows but the round bulb does not. Both of them have the same current flowing through them (they are in series) but the long bulb has a greater voltage across it because it has more resistance (even though V= IR is not obeyed exactly, voltage drop does depend on the resistance). If you connect a round bulb and a long bulb in parallel, however, it is the round bulb that is brighter because now the voltage across both bulbs is the same but the current is larger through the round bulb (smaller resistance).

Hence, the brightness of a bulb depends on power i.e, both voltage and current.

A sinkhole (in Karst topography) is a hole in the ground that forms when water dissolves surface rock. Often, this surface rock is limestone, which is easily eroded, or worn away, by the movement of water.

Formation of a Sinkhole: In a landscape where limestone sits underneath the soil, water from rainfall collects in cracks in the stone. These cracks are called joints. Slowly, as the limestone dissolves and is carried away, the joints widen until the ground above them becomes unstable and collapses. The collapse often happens very suddenly and without very much warning. Water collects in these collapsed sections, forming sinkholes.

Sinkholes also form when the roofs of caves collapse. Sinkholes are often funnel-shaped, with the wide end open at the surface and the narrow end at the bottom of the pool.Sinkholes vary from shallow holes about 1 meter (3 feet) deep, to pits more than 50 meters (165 feet) deep.