Sawaal
  • Home/
  • Certification Questions

Certification Questions

What are certifications?

Certification is the recognition of an individual to be qualified for a job or task. These Certification programs setup IT standards and play major role in developing a qualified workforce. Certifications can raise the technical standards.

Why certifications?

One can measure his/her abilities in their respective professional knowledge and present themselves through certificates. The certification programs assure technical proficiency of IT professionals by measuring their technical skills and knowledge in a specific IT support function or technology.

Who can do certifications?

Definitely who aim for professional growth in their respective functionality or technology can plan for Certifications. This can also tell how valuable certifications are to be potential employers. Any qualified and well experienced IT professional can step-up to take the certification.

How to do certifications?

When you decided to take the certification, well done! You have stepped up the professional ladder to upgrade your skills and knowledge. You can easily plan, work hard and grab a certification. Find some help from following steps.

  • Decide your certification – explore your skills and find a certification that matches your skill set.
  • Research the certification-evaluate the process of certification. Find details of validity, qualification for certification.
  • Evaluate your experience - asses your real experience with the material you gathered for certification and come up with a plan which areas to concentrate more.
  • Apply for certification – Get registered for your Exam.
  • Plan of study – you can study your well experienced areas yourself and can take trainings if required to boost your preparation. You can practice more through mock tests you find online, can keep discussing in forums and blogs.
  • Grab Certificate – finally, you can grab a certification with your positive attitude, hard work.
Popular Latest Rated
Q:

If one of the host connected to Sw-AC3 wants to send message to ip 190.0.2.5 (or any ip on a different subnet) what will be the destination MAC address ?

Answer

Answer and Explanation:


Because the destination address is on a different subnet from the switch, the packet will be forwarded to its default gateway. To verify the default gateway of this switch, use the show running-config command



From the output above, we can see that its default-gateway is 192.168.1.254. Which can be said to be a layer 3 device (router); in this case, the VLAN-R1 router. You can use the show cdp neighbor detail command verify further.



From the output above, you can confirm that the switch's default gateway is VLAN-R1 router (with the IP address of 192.168.1.254).The interface FastEthernet0/3 shows that the switch is directly connected to VLAN-R1 router through the switchport Fa0/3. To verify the MAC address associated this interface is interface, you use the show mac-address-table command:



Looking closely at the table above, you will discorver that the corresponding MAC address is 000a.b7e9.8360. Although there are some entries on port Fa0/3 with different Vlans ,but they have the same MAC address.


From the output above, you can confirm that the switch's default gateway is VLAN-R1 router (with the IP address of 192.168.1.254).The interface FastEthernet0/3 shows that the switch is directly connected to VLAN-R1 router through the switchport Fa0/3. To verify the MAC address associated this interface is interface, you use the show mac-address-table command
Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

1 5975
Q:

Which of the following MRP areas do not exist?

A. Consignment MRP area
B. Plant MRP area
C. Storage location MRP area
D. Subcontractor MRP area

Answer

Answer : A

Report Error

View answer Workspace Report Error Discuss

Subject: SAP MM

16 5972
Q:

If your routing table has a static, a RIP, and an EIGRP route to the same network, which route will be used to route packets by default?

A) Any available route B) RIP route
C) Static route D) EIGRP route
 
Answer & Explanation Answer: C) Static route

Explanation:

Static routes have an administrative distance of 1 by default. Unless you change this, a static route will always be used over any other dynamically learned route. EIGRP has an administrative distance of 90, and RIP has an administrative distance of 120, by default

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

1 5971
Q:

An asset under construction requires a separate asset class with their own account determination since depreciation has to be shown separately on the balances sheet.

A) TRUE B) FALSE
Answer & Explanation Answer: B) FALSE

Explanation:
Report Error

View Answer Workspace Report Error Discuss

Subject: SAP FI

1 5963
Q:

What is meant by same layer interaction

A) That a packet is forwarded to a different host that resides in the same layer of the Cisco three layer hierarchical model. B) That an interaction occurs within a single layer of a networking model and that no other layers or devices take any part in the interaction.
C) An interaction that progresses up or down only one level of a networking model. D) That two computers use a protocol defined at the same layer of a networking model to communicate with each other.
 
Answer & Explanation Answer: D) That two computers use a protocol defined at the same layer of a networking model to communicate with each other.

Explanation:
Report Error

View Answer Report Error Discuss

Filed Under: CCENT

0 5961
Q:

When several organizational units carry out dunning within a single company code, the SAP entity used to distinguish and control the process is called

A. dunning area

B. dunning key

C. dunning clerk

D. dunning procedure

Answer

Answer : A

Report Error

View answer Workspace Report Error Discuss

Subject: SAP FI

4 5886
Q:

When a router is connected to a Frame Relay WAN link using a serial DTE interface, how is the clock rate determined?

A) Supplied by the CSU/DSU B) By the far end router
C) By the clock rate command D) By the Physical layer bits stream timing
 
Answer & Explanation Answer: A) Supplied by the CSU/DSU

Explanation:

Clocking on a serial interface is always provided by the CSU/DSU (DCE device). However, if you do not have a CSU/DSU in your non-production test environment, then you need to supply clocking with the clock rate command on the serial interface of the router with the DCE cable attached.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

0 5878
Q:

Every company code can have following combinations as chart of accounts (COA)

A. one operating, one group and one alternate COA

B. one operating COA and many group COAs

C. many operating COAs and one group and one alternate CoA

D. one operating COA and one alternate COA

Answer

Answer : A ,D

Report Error

View answer Workspace Report Error Discuss

Subject: SAP FI

7 5839