Sawaal
  • Home/
  • Certification Questions

Certification Questions

What are certifications?

Certification is the recognition of an individual to be qualified for a job or task. These Certification programs setup IT standards and play major role in developing a qualified workforce. Certifications can raise the technical standards.

Why certifications?

One can measure his/her abilities in their respective professional knowledge and present themselves through certificates. The certification programs assure technical proficiency of IT professionals by measuring their technical skills and knowledge in a specific IT support function or technology.

Who can do certifications?

Definitely who aim for professional growth in their respective functionality or technology can plan for Certifications. This can also tell how valuable certifications are to be potential employers. Any qualified and well experienced IT professional can step-up to take the certification.

How to do certifications?

When you decided to take the certification, well done! You have stepped up the professional ladder to upgrade your skills and knowledge. You can easily plan, work hard and grab a certification. Find some help from following steps.

  • Decide your certification – explore your skills and find a certification that matches your skill set.
  • Research the certification-evaluate the process of certification. Find details of validity, qualification for certification.
  • Evaluate your experience - asses your real experience with the material you gathered for certification and come up with a plan which areas to concentrate more.
  • Apply for certification – Get registered for your Exam.
  • Plan of study – you can study your well experienced areas yourself and can take trainings if required to boost your preparation. You can practice more through mock tests you find online, can keep discussing in forums and blogs.
  • Grab Certificate – finally, you can grab a certification with your positive attitude, hard work.
Popular Latest Rated
Q:

A switch has been configured configured for three different VLANs : VLAN2, VLAN3 and VLAN4. A router has been added to provide communication between the VLANs. What minimum type of interface necessary on the router if only one connection is to be made between the router and the switch?

A) 10Mbps Ethernet B) 56Kbps Serial
C) 100Mbps Ethernet D) 1Gbps Ethernet
 
Answer & Explanation Answer: C) 100Mbps Ethernet

Explanation:

Although you can use either 100Mbps or 1Gbps Ethernet, the 100Mbps is necessary at a minimum and is the best answer to this question. You need to trunk the link from the switch to the router to make this connection work with inter-VLAN communication.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

0 5537
Q:

A wireless client cannot connect to an 802.11b/g BSS with a b/g wireless card. The client section of the access point does not list any active WLAN clients. What is a possible reason for this?

A) The incorrect channel is configured on the client B) The Client's IP address is on the wrong subnet
C) The client has an incorrect pre-shared key D) The SSID is configured incorrectly on the client
 
Answer & Explanation Answer: D) The SSID is configured incorrectly on the client

Explanation:

Although this question is cryptic at best, the only possible answer is option D. If the  SSID is not being broadcast (which we must assume in this question), the client must be configured with the correct SSID in order to associate to the AP.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

0 5514
Q:

Which of the following is not true about bottom-up estimating?

A) The WBS must be accurate and complete before this process can be used. B) Since the cost is largely independent of the desired accuracy it is the methodology of choice.
C) Its accuracy increases if the activities are smaller. D) It is not a useful methodology in the early project planning phase.
 
Answer & Explanation Answer: B) Since the cost is largely independent of the desired accuracy it is the methodology of choice.

Explanation:

“The cost and accuracy of bottom-up cost estimating is typically influenced by the size and complexity of the individual activity or work package.” PMBOK [7.1.2.4]

Report Error

View Answer Report Error Discuss

Filed Under: PMP Certification

0 5506
Q:

Refer to the exhibit. Which statement describes DLCI 17?

A: DLCI 17 describes the ISDN circuit between R2 and R3.
B: DLCI 17 describes a PVC on R2. It cannot be used on R3 or R1.
C: DLCI 17 is the Layer 2 address used by R2 to describe a PVCto R3.
D: DLCI 17 describes the dial-up circuit from R2 and R3 to the service provider.

Answer

Answer : C


Explanation:


Virtual circuits (VC)s are identified by DLCIs. DLCI values typically are assigned by the Frame Relay service provider. Frame Relay DLCIs have local significance.  A DLCI identifies a VC to the equipment at an endpoint. A DLCI has no significance beyond the single link. Two devices connected by a VC may use a different DLCI value to refer to the same connection.


Virtual circuits (VC)s are identified by DLCIs. DLCI values typically are assigned by the Frame Relay service provider. Frame Relay DLCIs have local significance.  A DLCI identifies a VC to the equipment at an endpoint. A DLCI has no significance beyond the single link. Two devices connected by a VC may use a different DLCI value to refer to the same connection. - See more at: https://www.orbitco-ccna-pastquestions.com/CCNA-Past-Questions%3A-WAN.php#sthash.nWKdjylM.dpuf
Report Error

View answer Workspace Report Error Discuss

Subject: CCNA

0 5471
Q:

Your company has a policy of having every software project reviewed and approved by the Architecture Review Board prior to the construction  phase of a project. you are currently in the process of activity sequencing. This is a example of what?

A) Gatekeeping B) Milestone
C) New scope for the project D) Project integration
 
Answer & Explanation Answer: B) Milestone

Explanation:

The approval by the Architecture Review Board is a milestone you want to include in activity sequencing so that you can ensure the requirements for meeting the review board's approval are met.  Answer A is tempting because the question references phase-end activities; however, it is not an example of gatekeeping because the project is not being authorized to continue based only on the architecture review.Gatekeeping often involves the review of other factors as well. Answer C is incorect because the requirement of a review board approval does not afect scope. Answer D is incorrect because project integration planning involves project plan development, execution, and integrated change control, which are not related to a review board.

Report Error

View Answer Report Error Discuss

Filed Under: PMP Certification

2 5444
Q:

You want to implement a network medium that is not susceptible to EMI. Which type of cabling should you use?

A) Thicknet coax B) Thinnet coax
C) Category 5 UTP cable D) Fiber-optic cable
 
Answer & Explanation Answer: D) Fiber-optic cable

Explanation:

Fiber-optic cable provides a more secure, long - distance cable that is not susceptible to EMI interference at high speeds.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

0 5437
Q:

You have a computer named Computer1 that runs Windows Vista and a computer named Computer2 that runs Windows 7. You plan to migrate all profiles and user files from Computer1 to Computer2.


You need to identify how much space is required to complete the migration.
What should you do?

A) On Computer1 run Loadstate c:\store /nocompress B) On Computer1 run Scanstate c:\store /nocompress /p
C) On Computer2 run Loadstate \\computer1\store /nocompress D) On Computer2 run Scanstate \\computer1\store /nocompress /p
 
Answer & Explanation Answer: B) On Computer1 run Scanstate c:\store /nocompress /p

Explanation:
Report Error

View Answer Report Error Discuss

Filed Under: MCSA-Microsoft Certified Solutions Associate

24 5427
Q:

Which of the following allows a router to respond to an ARP request that is intended for a remote host?

A) Gateway DP B) Reverse ARP (RARP)
C) Proxy ARP D) Inverse ARP (IARP)
 
Answer & Explanation Answer: C) Proxy ARP

Explanation:

Proxy ARP can help machines on a subnet reach remote subnets without configuring routing or a default gateway.

Report Error

View Answer Report Error Discuss

Filed Under: CCNA

0 5424